Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The paper, with a brief summary of timber floating in Sweden and also of some previous re-search in this field, contains a study on costs for timber-floating in the river Dalälven located in central Sweden. The public used timber-floating system in Dalälven and the historical background about this activity is described. The study is focused on the total costs for timber-floating in the public open floating system in Dalälven from 1900 to 1970, the year before the timber-floating was definitively closed down. Also the costs for separating the logs of a specific owner when they reached the point where they could be separated from the timber of other owners are analyzed..

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Each year 225 million pigs are transported within the European Union (EU) for slaughter, fattening and breeding. This results in poor animal welfare due to the fact that animals are exposed to several numbers of stress factors in the vehicle during loading, transit and unloading. Animal welfare can be defined as how well the animal attempts to cope with its environment and during transport there is often severe difficulty for the pigs to cope properly. There is a growing societal concern for animal welfare. This resulted in that the European Union enacted a law called the EU-regulation with certain directives of how to improve the welfare of the animals during transport.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

Abstract (in English)The purpose of this work is to find out what the driving instructor who currently works as a transport teachers feel about today´s driving education to transport high school to how it works at driving school. I describe in the study on how to become a transport teachers and on their everyday work. Even what others have written on this topic on driver training. I also interviewed four driving instructor who currently works as a transport teacher, about what they had for opinions on this issue. The method I have used myself of where unstructured questions to get so descriptive answers to questions as possible.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

This report is a joint venture with SCA Skog AB in the Jämtland forest management area. The company is a major player in the timber market in northern Sweden, and also a large business globally with offices in over 100 countries. The purpose of the study was to find out how timber suppliers want feedback/follow-up after completion of timber business. To determine this, a questionnaire survey was sent out to 75 landowners who supplied the wood for the company during the past year. The questionnaire consisted of a total of 15 questions with the opportunity to comment on certain issues.